67 Hemi Cuda

hemi1.jpg - 38651 Bytes

Here a few shots of my friends 1967 all steel blown 426 Hemi cuda. all of the work with the exception of the paint and the upholstery were done by him in a barn. it took about 5 years to compete the job ( he had to take time off to get his hip replaced one year) It has a Chris Las ton Chassis works chassis with a narrowed 9" Ford year, rack and pinion steering and yes it is street driven every weekend. Engine is a 1966 race hemi bored 0.10 over with a hydraulic roller cam and a 8/71 blower. 727 torque flight. Car has been a consistent trophy winner every time it has been entered in a show. The rear quarters were replaced and the wheel opening were stretched 7" to fit the tires. all body seams were welded and reground to hold a maximum of 1/8 inch gap.
Car belongs to David Brown of Mayo Maryland

Back to Members Rides

Back To Past Mopars of the Month
(Back To Past Mopars of the Month)